Vertical Turning Lathes

products

The first Vertical turning lathe was designed during an evolved phase of company's life with the huge advantage to exploit and offer the experience acquired during the production of other important machine tools in the past. At the beginning the sole turning version was flanked by the combined ram head for milling, drilling, grinding, boring, reaming and turning operations. The production covered a wide range of models: from the single column version, easier for size and design, TGF1, TGF5, TC10 and TG10, with 2 or 4 gears, fix cross railand7or movable, till the double column versions TG.20, TG.30, TG.40, TG.50, following for dimensions, power and torques the grooving requirements of the customers.

The hydrostatic bearing of the table and axes, Executed with experience and precision, becomes almost a "must" for all the versions larger than 3 mt. of diameter. The possibility of machining outside of the table center line is later guaranteed by our VTL models "TGP". This machines allow a plurality of machining by means of a single setup of the workpiece, abating drastically the lost times for the placement and de-placement on different machines. Every model is customized tailor-made, according to the productive requirements of the end user by means of special accessories: tool changers, special attachments, special tools and tool holders (ISO, CAPTO, KM, HSK etc), of the fixtures, operator platforms, video monitoring system, and so forth.

turning diameter

Technical sheet: vertical turning lathes - turning diameter: 650-900

MODEL	U.M.	TGF1/650	TGF1/900
TURNING DIAMETER	mm.	650	900
TABLE DIAMETER	mm.	400 o 500	600 o 700
TURNING HEIGHT	mm.	750	750
MAX. WEIGHT ON THE TABLE	T	1	1
MAX. TABLE SPEED	rpm	10-2000	10-2000
NR. OF RANGES	nr	1 o 2	1 o 2
TABLE MOTOR	kw	37-60	37-60
"Z" AXIS STROKE	mm	600	600
RAM SECTION	mm	-	-
"X" E "Z" RAPID FEEDS	mm/min	15000	15000
"Y" STROKE	mm	-	-
MILLING SPEED	rpm	0-4000	0-4000
MILLING MOTOR	kw	11	11

Technical sheet: vertical turning lathes - turning diameter: 1000-1300

MODEL	U.M.	TGF5/1000	TGF5/1300	TC10/1300	TC10/1300
TURNING DIAMETER	mm.	1000	1300	1300	1300
TABLE DIAMETER	mm.	800	1000	1000	1000
TURNING HEIGHT	mm.	500-750	750-1000	750-1200	750-1200
MAX. WEIGHT ON THE TABLE	T	5	5	8	8
MAX. TABLE SPEED	rpm	10-1000	10-800	10-900	10-900
NR. OF RANGES	nr	2	2	2	2
TABLE MOTOR	kw	37-60	37-60	60-80	60-80
"Z" AXIS STROKE	mm	500-750	750-1000	750-1000	750-1000
RAM SECTION	mm	180x180 o 250x250	250x250	250x250	250x250
"X" E "Z" RAPID FEEDS	mm/min	10000-20000	10000-20000	10000-20000	10000-20000
"Y" STROKE	mm	-	-	-	-
MILLING SPEED	rpm	0-4000	0-4000	0-4000	0-4000
MILLING MOTOR	kw	37	37	37	37

Technical sheet: vertical turning lathes - turning diameter: 1300-1850

MODEL	U.M.	TC10/1600	TC10/1850	TG10/1600	TG10/1850	TG20/1850	TCP10/1450	TCP10/1650
TURNING DIAMETER	mm.	1600	1850	1600	1850	1850	1450	1650
TABLE DIAMETER	mm.	1250	1500	1250	1500	1500	1200	1400
TURNING HEIGHT	mm.	750 1400	750 1400	750 1400	750 1600	1400 1700 2000	1500	1500
MAX. WEIGHT ON THE TABLE	T	15	15	15	15	20	15	15
MAX. TABLE SPEED	rpm	10-700	5-600	10-700	5-600	3-300	2-600	2-500
NR. OF RANGES	nr	2	2	4	4	4	2	2
TABLE MOTOR	kw	60-80	60-80	60-100	60-100	60-100	60	60
"Z" AXIS STROKE	mm	750 1000 1200	750 1000 1200	750 1000 1200	750 1000 1200	750 1000 1200 1500	1020	1020
RAM SECTION	mm	250x250	250x250	250x250	250x250	250x250	300x300	300x300
"X" E "Z" RAPID FEEDS	mm/min	10000 20000	10000 20000	10000 20000	10000 20000	10000 20000	25000	25000
"Y" STROKE	mm	-	-	-	-	-	-75/+1475	-75/+1475
MILLING SPEED	rpm	0-4000	0-4000	0-4000	0-4000	0-4000	0-4000	0-4000
MILLING MOTOR	kw	37	37	37	37	37	28	28

Technical sheet: vertical turning lathes - turning diameter: 1850-2500

MODEL	U.M.	TG20/2200	TG20/2500	TCP10/2000
TURNING DIAMETER	mm.	2200	2500	2000
TABLE DIAMETER	mm.	1750	2000	1650
TURNING HEIGHT	mm.	1400 1700 2000	1400 1700 2000	1500
MAX. WEIGHT ON THE TABLE	T	20	20	15
MAX. TABLE SPEED	rpm	3-300	2-250	2-450
NR. OF RANGES	nr	4	4	2
TABLE MOTOR	kw	60-100	60-100	60
"Z" AXIS STROKE	mm	800 1000 1200 1500	800 1000 1200 1500	1020
RAM SECTION	mm	250x250	250x250	300x300
"X" E "Z" RAPID FEEDS	mm/min	10000 20000	10000 20000	25000
"Y" STROKE	mm	-	-	-75/+1475
MILLING SPEED	rpm	0-4000	0-4000	0-4000
MILLING MOTOR	kw	37	37	28

Technical sheet: vertical turning lathes - turning diameter: 2500-3500

MODEL	U.M.	TG25/3000	TG25/3500	TG30/3500	TGM20/3000	TGP20/2700	TGP20/3200	TGP30/3500
TURNING DIAMETER	mm.	3000	3500	3500	3000	2700	3200	3500
TABLE DIAMETER	mm.	2500	2500	3000	1500	2000	2500	3000
TURNING HEIGHT	mm.	2000 2300	2000 2300	2000 2350 2700	2000	1700 2000	1700 2000	2000 2300
MAX. WEIGHT ON THE TABLE	T	40	40	55	20	35	35	50
MAX. TABLE SPEED	rpm	1.5-180	1.5-180	1.5-150	3-300	2-200	1.5-170	1-120
NR. OF RANGES	nr	4	4	4	2	2	2	2
TABLE MOTOR	kw	60-100	60-100	100-150	60-100	60-100	60-100	60-100
"Z" AXIS STROKE	mm	1200 1500	1200 1500	1200 1500 1800	1000 1200	1000 1200	1000 1200	1200 1500
RAM SECTION	mm	250x250	250x250	300x300	250x250	250x250	250x250	300x300
"X" E "Z" RAPID FEEDS	mm/min	15000	15000	15000	10000 20000	10000 20000	10000 20000	15000
"Y" STROKE	mm	-	-	-	±750	±1350	±1600	±1750
MILLING SPEED	rpm	0-4000	0-4000	0-4000	0-4000	0-4000	0-4000	0-4000
MILLING MOTOR	kw	37	37	51	37	37	37	51

Technical sheet: vertical turning lathes - turning diameter: 3500-4500

MODEL	U.M.	TG25/4000	TG30/4000	TG30/4500	TG40/4500	TGM20/4000	TGP30/4000	TGP40/4500
TURNING DIAMETER	mm.	4000	3500	4500	4500	4000	4000	4500
TABLE DIAMETER	mm.	3000	3000	4000	3500	2000	3500	3500
TURNING HEIGHT	mm.	2000 2300	2000 2350 2700	2000 2350 2700	2500 3000 3500	2000	2000 2300	3000 3500
MAX. WEIGHT ON THE TABLE	T	55	55	55	55	20	50	75
MAX. TABLE SPEED	rpm	1.5-150	1.5-150	1.5-120	1.5-120	2-250	1-100	1-100
NR. OF RANGES	nr	4	4	4	4	2	2	2
TABLE MOTOR	kw	60-100	100-150	100-150	100-165	60-100	60-100	100-130
"Z" AXIS STROKE	mm	1200 1500	1200 1500 1800	1200 1500 1800	1500 1800	1000 1200	1200 1500	1500 1800
RAM SECTION	mm	250x250	300x300	300x300	300x300	250x250	300x300	300x300
"X" E "Z" RAPID FEEDS	mm/min	15000	15000	15000	15000	10000 20000	15000	15000
"Y" STROKE	mm	-	-	-	-	±1000	±2000	±2250
MILLING SPEED	rpm	0-4000	0-4000	0-4000	0-4000	0-4000	0-4000	0-4000
MILLING MOTOR	kw	37	37-51	37-51	37-51	37	51	37-51

Technical sheet: vertical turning lathes - turning diameter: 4500-5500

MODEL	U.M.	TG40/5000	TG40/5500	TG50/5500	TGM30/5000	TGP40/5500	TGP50/5500
TURNING DIAMETER	mm.	5000	5500	5500	5000	5500	5500
TABLE DIAMETER	mm.	4000	4500	4500	2500	4500	4500
TURNING HEIGHT	mm.	2500 3000 3500	2500 3000 3500	3500 4500 5500	2500	3000 3500	3000 5500
MAX. WEIGHT ON THE TABLE	T	55	80	80-120	40-55	75	100-150
MAX. TABLE SPEED	rpm	1-120	1-100	0.25-100	1.5-200	0.5-80	0.25-80
NR. OF RANGES	nr	4	4	4	2	2	2
TABLE MOTOR	kw	100-165	100-165	150-195	60-100	100-130	130-150
"Z" AXIS STROKE	mm	1500 1800	1500 1800	1500 1800 2000	1200 1500	1500 1800	1800 2000
RAM SECTION	mm	300x300	300x300	300x300 350x350	300x300	300x300	300x300
"X" E "Z" RAPID FEEDS	mm/min	15000	15000	15000	15000	15000	15000
"Y" STROKE	mm	-	-	-	±1250	±2750	±2750
MILLING SPEED	rpm	0-4000	0-4000	0-4000	0-4000	0-4000	0-4000
MILLING MOTOR	kw	37-51	37-51	37-51	37-51	37-51	37-51

Technical sheet: vertical turning lathes - turning diameter: 5500-6500

MODEL	U.M.	TG50/6000	TG50/6500	TG60/6500	TGM30/6000	TGP50/6500	TGP60/6500
TURNING DIAMETER	mm.	6000	6500	6500	6000	6500	6500
TABLE DIAMETER	mm.	5000	5500	5500	3000	5500	5500
TURNING HEIGHT	mm.	3500 4500 5500	3500 4500 5500	3500 4500 5500	2500	3500 5500	3500 5500
MAX. WEIGHT ON THE TABLE	T	80-120	80-120	200	40-55	100-150	200
MAX. TABLE SPEED	rpm	0.25-100	0.25-80	0.25-65	1-180	0.25-80	0.25-65
NR. OF RANGES	nr	4	4	4	2	2	2
TABLE MOTOR	kw	150-195	150-195	150-195	60-100	130-150	150-195
"Z" AXIS STROKE	mm	1500 1800 2000	1500 1800 2000	1800 2000	1200-1500	1800 2000	1800 2000
RAM SECTION	mm	300x300 350x350	300x300 350x350	300x300 450x450	300x300	350x350	300x300
"X" E "Z" RAPID FEEDS	mm/min	15000	15000	15000	15000	15000	10000
"Y" STROKE	mm	-	-	-	±1500	±3250	±3250
MILLING SPEED	rpm	0-4000	0-4000	0-2500	0-4000	0-4000	0-2500
MILLING MOTOR	kw	51	51	51	51	51	71

Technical sheet: vertical turning lathes - turning diameter: 6500-7500

MODEL	U.M.	TG60/7000	TG60/7500	TGP60/7500
TURNING DIAMETER	mm.	7000	7500	7500
TABLE DIAMETER	mm.	6000	6000	6000
TURNING HEIGHT	mm.	3500 4500 5500	3500 4500 5500	3500 5500
MAX. WEIGHT ON THE TABLE	T	200	200	200
MAX. TABLE SPEED	rpm	0.25-65	0.25-65	0.25-65
NR. OF RANGES	nr	4	4	2
TABLE MOTOR	kw	150-195	150-195	150-195
"Z" AXIS STROKE	mm	1800 2000	1800 2000	1800 2000
RAM SECTION	mm	300x300 450x450	300x300 450x450	450x450
"X" E "Z" RAPID FEEDS	mm/min	15000	15000	10000
"Y" STROKE	mm	-	-	±3750
MILLING SPEED	rpm	0-2500	0-2500	0-250
MILLING MOTOR	kw	51-71	51-71	51-71

Milling Machine "Gantry" type

It's getting often diffused and appreciated among our customers, the concept of "turnkey solution" for the realization of the machine tool.

And it's especially in the milling machines with moving portal, both for traditional version for challenging chips removal, with the "SG", "LG" and "HG" models , than in the next evolution of the series "Millenium" for high speed machining, in the models "MG" and "CB/CBM", that this aspect finds wide success.

The machine, offers a wide flexibility both for the structures exploiting potentially limitless stroke of the portal along "X" axis (thank to the modular concept of the basements) either of performance (concept of mechanical transmission of the power and/or through electrospindle, possible this, by means of an easy automatic exchange of the cartridge ), becoming true and real productive vehicle, by completing with the study of the machining cycle and the tools selection, the supply, perfectly in line with the main criteria of the sector of reference. Further to this, for the customer thorough satisfaction, the study of the piece clamping, of the machining program and tool paths as well, all these arguments allow the customer to exploit the machine from the switch-on to the final machining of the finished piece, in automatic manner, reliable and quick.

distance between the columns

Technical sheet: milling machine gantry type - distance between the columns: 1200-2200

MODEL	U.M.	SG12	SG17	SG22	LG22
"X" AXIS STROKE	mm.	3000-36000	3000-36000	3000-36000	4000-36000
"Y" AXIS STROKE	mm.	1700	2200	2700	2700
"Z" AXIS STROKE	mm.	750 1000	750 1000	750 1000	1000 1200 1500
"C" AXIS	deg	NA	NA	NA	NA
"A" AXIS	deg	NA	NA	NA	NA
"X" AND "Z" AXES FEEDING	mm/min	10-15000	10-15000	10-15000	10-20000
CLEARANCE BETWEEN THE COLUMNS	mm	1200	1700	2200	2200
TABLE WIDTH	mm	1200	1700	2200	1750
TABLE LENGHT	mm	3000-36000	3000-36000	3000-36000	4000-36000
DISTANCE BETWEEN TABLE AND SPINDLE NOSE	mm	750 1000	750 1000	750 1000	750 1000
MAX CUTTING FEED	mm/min	10-15000	10-15000	10-15000	10-20000
MAX ACCELERATION	mm/sec²	NA	NA	NA	NA
RANGE OF SPEED	rpm	0-4000	0-4000	0-4000	0-4000
MAX TORQUE	Nm	fino a 1800	fino a 1800	fino a 1800	fino a 2500
SPINDLE POWER	Kw	fino a 37	fino a 37	fino a 37	fino a 51

Technical sheet: milling machine gantry type - distance between the columns: 2200-3000

MODEL	U.M.	MG27	LG26	LG30	HG30	HGH30
"X" AXIS STROKE	mm.	4000-18000	3000-36000	3000-36000	da 4000	da 4000
"Y" AXIS STROKE	mm.	3500	3100	3500	4000	4300
"Z" AXIS STROKE	mm.	1270 1550 2000	1000 1200 1500	1000 1200 1500	1200 1800	1200 2000
"C" AXIS	deg	400 (±200)	NA	NA	360 (±180)	360 (±180)
"A" AXIS	deg	220 (±110)	NA	NA	360 (±180)	360 (±180)
"X" AND "Z" AXES FEEDING	mm/min	10-40000	10-20000	10-20000	10-20000	10-20000
CLEARANCE BETWEEN THE COLUMNS	mm	2700	2600	3000	3000	3000
TABLE WIDTH	mm	2500	2000	2500	2000	2000
TABLE LENGHT	mm	a richiesta	4000-36000	4000-36000	da 4000	da 4000
DISTANCE BETWEEN TABLE AND SPINDLE NOSE	mm	1250 1550 2000	1000 1200 1500	1000 1200 1500	1200 1800	1200 2000
MAX CUTTING FEED	mm/min	10-40000	0-4000	fino a 2500	10-20000	10-20000
MAX ACCELERATION	mm/sec²	fino a 3000	NA	NA	NA	NA
RANGE OF SPEED	rpm	20-24000	0-4000	0-4000	0-4000	0-4000
MAX TORQUE	Nm	60-1400	fino a 2500	fino a 2500	fino a 4000	fino a 6000
SPINDLE POWER	Kw	30-46	fino a 51	fino a 51	fino a 71	fino a 78

Technical sheet: milling machine gantry type - distance between the columns: 3000-4500

MODEL	U.M.	MG37	HG35	HG40	HG45	HGH35	HGH40	HGH45
"X" AXIS STROKE	mm.	4000-18000	da 4000	da 4000	da 6000	da 4000	da 4000	da 6000
"Y" AXIS STROKE	mm.	4500	4500	5000	5500	4800	5300	5800
"Z" AXIS STROKE	mm.	1270 1550 2000	1200 1800	1200 1800	1200 2000	1200 2000	1200 2000	1500 2500
"C" AXIS	deg	400 (±200)	360 (±180)	360 (±180)	360 (±180)	360 (±180)	360 (±180)	360 (±180)
"A" AXIS	deg	220 (±110)	360 (±180)	360 (±180)	360 (±180)	360 (±180)	360 (±180)	360 (±180)
"X" AND "Z" AXES FEEDING	mm/min	10-40000	10-20000	10-20000	10-20000	10-20000	10-20000	10-20000
CLEARANCE BETWEEN THE COLUMNS	mm	3700	3500	4000	4500	3500	4000	4500
TABLE WIDTH	mm	3000	2500	3000	3500	2500	da 4000	3500
TABLE LENGHT	mm	da 4000	da 4000	da 4000	da 6000	da 4000	da 4000	da 6000
DISTANCE BETWEEN TABLE AND SPINDLE NOSE	mm	1270 1550 2000	1200 1800	1200 1800	1200 2000	1200 2000	1200 2000	1500 2500
MAX CUTTING FEED	mm/min	10-40000	10-20000	10-20000	10-20000	10-20000	10-20000	10-20000
MAX ACCELERATION	mm/sec²	fino a 3000	NA	NA	NA	NA	NA	NA
RANGE OF SPEED	rpm	20-24000	0-4000	0-4000	0-4000	0-4000	0-4000	0-3500
MAX TORQUE	Nm	60-1400	fino a 4000	fino a 4000	fino a 6000	fino a 6000	fino a 6000	fino a 10000
SPINDLE POWER	Kw	30-46	fino a 71	fino a 71	fino a 100	fino a 78	fino a 78	fino a 130

Technical sheet: milling machine gantry type - distance between the columns: 4500-6000

MODEL	U.M.	CB54	CBM54	MG47	HG50	HG60	HGH50	HGH60
"X" AXIS STROKE	mm.	4000-18000	4000-18000	4000-18000	da 6000	da 6000	da 6000	da 6000
"Y" AXIS STROKE	mm.	3500	3500	5500	6000	7000	6300	7300
"Z" AXIS STROKE	mm.	1270 1550 2000	1550 2000	1270 1550 2000	1200 2000	1200 2000	1500 2500	1500 2500
"C" AXIS	deg	400 (±200)	continuo	400 (±200)	360 (±180)	360 (±180)	360 (±180)	360 (±180)
"A" AXIS	deg	220 (±110)	220 (±110)	220 (±110)	360 (±180)	360 (±180)	360 (±180)	360 (±180)
"X" AND "Z" AXES FEEDING	mm/min	0-40000	10-76000	10-40000	10-20000	10-20000	10-20000	10-20000
CLEARANCE BETWEEN THE COLUMNS	mm	5400	5400	4700	5000	6000	5000	6000
TABLE WIDTH	mm	2500	2500	a richiesta	4000	4500	da 6000	4500
TABLE LENGHT	mm	a richiesta	a richiesta	a richiesta	da 6000	da 6000	da 6000	da 6000
DISTANCE BETWEEN TABLE AND SPINDLE NOSE	mm	1270 1550 2000	1550 2000	1270 1550 2000	1200 2000	1200 2000	1500 2500	1500 2500
MAX CUTTING FEED	mm/min	10-40000	10-76000	0-40000	10-20000	10-20000	10-20000	10-20000
MAX ACCELERATION	mm/sec²	fino a 3500	7000	fino a 3000	NA	NA	NA	NA
RANGE OF SPEED	rpm	20-36000	1500-36000	0-24000	0-4000	0-4000	0-4000	0-4000
MAX TORQUE	Nm	30-1400	30-1400	60-1400	fino a 6000	fino a 6000	fino a 10500	fino a 10500
SPINDLE POWER	Kw	30-45	30-46	30-46	fino a 100	fino a 100	fino a 130	fino a 130

Technical sheet: milling machine gantry type - distance between the columns: 6000-7500

MODEL	U.M.	CB64	CB74	CBM64	CBM74
"X" AXIS STROKE	mm.	4000-18000	4000-18000	4000-18000	4000-18000
"Y" AXIS STROKE	mm.	4500	5500	4500	5500
"Z" AXIS STROKE	mm.	1270 1550 2000	1270 1550 2000	1550 2000	1550 2000
"C" AXIS	deg	400 (±200)	400 (±200)	continuo	continuo
"A" AXIS	deg	220 (±110)	220 (±110)	220 (±110)	220 (±110)
"X" AND "Z" AXES FEEDING	mm/min	10-40000	10-40000	10-76000	10-76000
CLEARANCE BETWEEN THE COLUMNS	mm	6400	7400	6400	7400
TABLE WIDTH	mm	3000	a richiesta	3000	a richiesta
TABLE LENGHT	mm	a richiesta	a richiesta	a richiesta	a richiesta
DISTANCE BETWEEN TABLE AND SPINDLE NOSE	mm	1270 1550 2000	1270 1550 2000	1550 2000	1550 2000
MAX CUTTING FEED	mm/min	10-40000	10-40000	10-76000	10-76000
MAX ACCELERATION	mm/sec²	fino a 3500	fino a 3500	7000	7000
RANGE OF SPEED	rpm	20-36000	20-36000	1500-36000	1500-36000
MAX TORQUE	Nm	30-1400	30-1400	30-1400	30-1400
SPINDLE POWER	Kw	30-45	30-45	30-46	30-46

Milling Machine with Moving Table

The concept of milling machine with moving table, arises as natural evolution of MC's planers which made famous our company's name since the beginning. The first model produced was the FPP capable of 5mt stroke along the "Y" axis and up to 16m on "X" axis. Such version was later flanked by a new series of machines, named "Millenium" with newest characteristics of high speed movements up to 40.000mm/min and acceleration up to 2.500mm/sec² and, as latest, the FAST technology (Flexible Automatization Spindle Transfer).

Such innovative application allows the customer to change the sole cartridge without any heavy and expensive change of the main head. Hence the opportunity to reach high rotation speed range, from 4.000 to 24.000, 36.000 e 48.000 rpm. Finally, every machine is completed with the required accessories that the specific application requires.

distance between the columns

Technical sheet: milling machine with moving table - distance between the columns: 1300-2000

MODEL	U.M.	FPP105	FP52/1500	FPP125	FP52/1750
"X" AXIS STROKE	mm.	4500-16000	4500-16000	4500-16000	4500-16000
"Y" AXIS STROKE	mm.	2000	2000	2300	2250
"Z" AXIS STROKE	mm.	750-1200	500-750	750-1200	500-750
"C" AXIS	deg.	NA	NA	NA	NA
"A" AXIS	deg.	NA	NA	NA	NA
TABLE FEEDING	mm/min	10-20000	20-60000	10-20000	20-60000
"Y" AND "Z" AXES FEEDING	mm/min	10-20000	10-20000	10-20000	10-20000
CLEARANCE BETWEEN THE COLUMNS	mm.	1300	1600	1600	1800
TABLE WIDTH	mm.	1050	1250	1250	1500
TABLE LENGHT	mm.	da 4500	4000-16000	da 4500	4000-16000
DISTANCE BETWEEN TABLE AND SPINDLE NOSE	mm.	1500-2000	1000-1500	1500-2000	1000-1500
CUTTING FEEDS	mm/min	10-20000	20-60000	10-20000	20-60000
MAX ACCELERATION	mm/sec²	NA	NA	NA	NA
SPINDLE ROTATION SPEED	giri/min	0-4000	0-4000	0-4000	0-4000
TORQUE	Nm	1800	1300	1800	1300
MILLING MOTOR PPOWER	kw	37	22	37	22

Technical sheet: milling machine with moving table - distance between the columns: 2000-2500

MODEL	U.M.	MT21	FP52/2000	FPP155	FPP180 P
"X" AXIS STROKE	mm.	3500	4500-16000	4500-16000	6500-16000
"Y" AXIS STROKE	mm.	2900	2500	3000	3000
"Z" AXIS STROKE	mm.	1270-1550	500-750	750-1200	1200-1500
"C" AXIS	deg.	400 (±200)	NA	NA	NA
"A" AXIS	deg.	220 (±110)	NA	NA	NA
TABLE FEEDING	mm/min	10-25000	20-60000	10-20000	10-20000
"Y" AND "Z" AXES FEEDING	mm/min	10-25000	20-60000	10-20000	10-20000
CLEARANCE BETWEEN THE COLUMNS	mm.	2100	2100	2100	2100
TABLE WIDTH	mm.	1500	2000	1500	1800
TABLE LENGHT	mm.	3000 4000 5000	4000 16000	da 4500	da 6500
DISTANCE BETWEEN TABLE AND SPINDLE NOSE	mm.	1270-1550	1000-1500	1500-2000	1500-3000
CUTTING FEEDS	mm/min	10-25000	20-60000	10-20000	10-20000
MAX ACCELERATION	mm/sec²	fino a 2500	NA	NA	NA
SPINDLE ROTATION SPEED	giri/min	20-24000	0-4000	0-4000	0-4000
TORQUE	Nm	60-1400	1300	1800	fino a 4500
MILLING MOTOR PPOWER	kw	30-45	22	37	55-100

Technical sheet: milling machine with moving table - distance between the columns: 2500-3000

MODEL	U.M.	FPP220 P	FP52/2500	FPP220	FPP220 P	MT27
"X" AXIS STROKE	mm.	6500-16000	4500-16000	6500-16000	6500-16000	4500
"Y" AXIS STROKE	mm.	3600	3000	3500	3600	3500
"Z" AXIS STROKE	mm.	1200-1500	500-750	750-1500	1200-1500	1270-1550
"C" AXIS	deg.	NA	NA	NA	NA	400 (±200)
"A" AXIS	deg.	NA	NA	NA	NA	220 (±110)
TABLE FEEDING	mm/min	10-20000	20-60000	10-20000	10-20000	10-25000
"Y" AND "Z" AXES FEEDING	mm/min	10-20000	10-20000	10-20000	10-20000	10-25000
CLEARANCE BETWEEN THE COLUMNS	mm.	2600	2600	2600	2600	2700
TABLE WIDTH	mm.	2000	2500	2200	2000	2200
TABLE LENGHT	mm.	da 6500	4000-16000	da 6500	da 6500	3000 4000 5000
DISTANCE BETWEEN TABLE AND SPINDLE NOSE	mm.	1500-3000	1000-1500	1500-2000	1500-3000	1270-1550
CUTTING FEEDS	mm/min	10-20000	20-60000	10-20000	10-20000	-
MAX ACCELERATION	mm/sec²	NA	NA	NA	NA	fino a 2500
SPINDLE ROTATION SPEED	giri/min	0-4000	0-4000	0-4000	0-4000	20-24000
TORQUE	Nm	fino a 4500	1300	1800	fino a 4500	60-1400
MILLING MOTOR PPOWER	kw	55-100	22	37	55-100	30-45

Technical sheet: milling machine with moving table - distance between the columns: 3000-3500

MODEL	U.M.	FPP250	FPP250 P
"X" AXIS STROKE	mm.	6500-16000	6500-16000
"Y" AXIS STROKE	mm.	4000	4000
"Z" AXIS STROKE	mm.	750-1500	1200-1500
"C" AXIS	deg.	NA	NA
"A" AXIS	deg.	NA	NA
TABLE FEEDING	mm/min	10-20000	10-20000
"Y" AND "Z" AXES FEEDING	mm/min	10-20000	10-20000
CLEARANCE BETWEEN THE COLUMNS	mm.	3000	3000
TABLE WIDTH	mm.	2500	2200
TABLE LENGHT	mm.	da 6500	da 6500
DISTANCE BETWEEN TABLE AND SPINDLE NOSE	mm.	1500-2000	1500-3000
CUTTING FEEDS	mm/min	10-20000	10-20000
MAX ACCELERATION	mm/sec²	NA	NA
SPINDLE ROTATION SPEED	giri/min	0-4000	0-4000
TORQUE	Nm	1800	fino a 4500
MILLING MOTOR PPOWER	kw	37	55-100

Technical sheet: milling machine with moving table - distance between the columns: 3500-4000

MODEL	U.M.	MT37	FPP300 P	FPP350 P
"X" AXIS STROKE	mm.	5500	6500-16000	6500-16000
"Y" AXIS STROKE	mm.	4500	4700	5200
"Z" AXIS STROKE	mm.	1270-1550	1200-1500	1200-1500
"C" AXIS	deg.	400 (±200)	NA	NA
"A" AXIS	deg.	220 (±110)	NA	NA
TABLE FEEDING	mm/min	10-25000	10-20000	10-20000
"Y" AND "Z" AXES FEEDING	mm/min	10-25000	10-20000	10-20000
CLEARANCE BETWEEN THE COLUMNS	mm.	3700	3700	4200
TABLE WIDTH	mm.	2500	3000	3500
TABLE LENGHT	mm.	3000 4000 5000	da 6500	da 6500
DISTANCE BETWEEN TABLE AND SPINDLE NOSE	mm.	1270-1550	1500-3000	1500-3000
CUTTING FEEDS	mm/min	10-25000	10-20000	10-20000
MAX ACCELERATION	mm/sec²	fino a 2500	NA	NA
SPINDLE ROTATION SPEED	giri/min	20-24000	0-4000	0-4000
TORQUE	Nm	60-1400	fino a 4500	fino a 4500
MILLING MOTOR PPOWER	kw	30-45	55-100	55-100